Mã sản phẩm:

Giá: Liên hệ

Kho hàng: Còn hàng

Hotline: 0968.485.838

CS-iTEC flow sensor S 430

S 430 is based on the pitot tube principle to measure flow. Properly installed (refer to instruction manual for details) the sensor can measure in wet and dirty gases as occurring, for example, at the discharge of a compressor.

The sensor features long term stability , wide turn-down ratio and good temperature stability. It can be used in compressed air and non-corrosive gases.

Through a 1/2” G-type ball valve the sensor can be inserted into the pipe under pressure.

Various output signals allow the sensor to be connected to CS-iTEC displays and/or third party displays and PLCs.



S 430 measures:
– Standard flow and consumption
– Actual velocity
– Pressure
– Temperature

Product features

Technical data

Flow range 30 … 200 Sm/s
Sm/s: Standard meter per seconds at 20 °C
and 1000 hPa
Pressure range 0 … 1.6 MPa
Temperature range -40 … +200 ºC
Accuracy Flow: 0.5 % F.S.
Pressure: 0.5 % F.S.
Temperature: 0.5 °C
Pipe diameters DN 25 (1”) up DN 300 (12″)
Reference conditions Programmable,
default P =1000 hPa, T = 20 °C
Medium Wet and dry air and non-corrosive gases
Output signals 4 … 20 mA (flow rate)
Pulse (consumption)
Modbus/RTU (all signals available)
SDI (CS-iTEC specific)
Medium temp. -40 °C … +200 ºC
Ambient temp. -20 °C … +60 ºC
Operating pressure 0 … 1.6 MPa
Power supply 24 VDC, 150 mA
Display option 2” color graphics display with keypad
Process connection 1/2” G type