SẢN PHẨM KHUYẾN MÃI

Soldering iron/Station type HAKKO FM-203

Mã sản phẩm:

Giá: Liên hệ

Kho hàng: Còn hàng

Hotline: 0968.485.838

A single station plays multiple roles: Soldering, desoldering, and SMD rework
Two handpieces can be selected in various combinations 
*This station is equipped with one HAKKO FM-2027 handpiece.
A wide range of handpiece selection
· Figures of connectable handpieces are shown on the connectors as well as the indications of "Channel D" and "Channel S".
Handpiece combination examples
 
 
FM-203
Simultaneous use Channel D Channel S
Yes FM-2027

HAKKO FM-2027
     Soldering iron

FM-2027

HAKKO FM-2027
     Soldering iron

FM-2024

HAKKO FM-2024(*1)
     Desoldering tool

FM-2026

HAKKO FM-2026(*2)
     N2 soldering iron

FM-2032

HAKKO FM-2032
     Micro soldering iron

No
Either one of handpieces operates
FM-2022

HAKKO FM-2022
     Rework tool
     (direct heat-type)

No
Either one of handpieces operates
FM-2023

HAKKO FM-2023
     Rework tool
     (direct heat-type)

Yes FM-2024

HAKKO FM-2024(*1)
     Desoldering tool

Yes FM-2026

HAKKO FM-2026(*2)
     N2 soldering iron

Yes FM-2026

HAKKO FM-2032
     Micro soldering iron

*1 For HAKKO FM-2024, each handpiece needs a desoldering control box and compressor.
*2 For HAKKO FM-2026, each handpiece needs an N2 generator (HAKKO FX-780), flowmeter (HAKKO FX-791), compressor, regulator, etc. For further details, refer to the combination examples.
   
Poweful thermal recovery performance
  · See how much its thermal recovery is improved by using a composite tip
HAKKO FM-203&HAKKO 937 Thermal Recovery Graph

 

Power save function
  · Sleep function : While the handpiece is being placed on the iron holder (HAKKO FH-200), the sleep function is activated and decreases the temperature of tip on the holder up to approximately 200°C , preventing the tip from being oxidized. In addition, this function can relieve the load applied to the tip due to the high-temperature settings required for lead-free soldering.
· Auto power shut-off function : By connecting the iron holder (HAKKO FH-200) and station with the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function. 
Auto power shut-off function
Combined use with an optional handpiece (HAKKO FM-2026, etc.) enables use of the N2system
Buzzer ON/OFF setting is available
  · Whether to make the buzzer sound or not when an error occurs or a target temperature is reached is settable.