The Goot PX-60RT-1C soldering tip is compatible with:
|Standard type soldering iron replacement tip:
B, SB, 1C, 2C, 3C, 4C,
1.2D, 2.4D, 3.2D, 5L, LB.
|Round solder-plated type
soldering iron replacement tip:
1CR, 2CR, 3CR, 4CR.
This soldering iron replacement tip has a copper base. Inside of the tip there is an antistick stainless steel corral. This iron tip has a laser print for identification.
The characteristic of soldering iron tip temperature recovery
The characteristic above was obtained by melting a solder consecutively on 5 x 5mm PCB land size and simultaneously measuring tip temperature with a thermocouple fit on a tip.
While replacing the standard soldering tip, temperature indication inaccuracy may occur because of tip shape or weight differences. In this case, it is necessary to calibrate the soldering iron.
Estimated indication accuracy after replacement of a standard soldering tip:
- Unscrew a barrel nut.
- Take off a heater collar.
- Replace a soldering tip.
Stainless steel collar inside of the tip can stick to a heater. When replacing a tip, be sure to take it off from a heater. To prevent an iron tip and a heating element from sticking to each other, and from damage when replacing a tip, regularly take off and on an iron tip.